Find Silicon Carbide, Aluminum Oxide Abrasive , Sanding Glass on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
New Products
Powder Black Silicon Carbide manufacturer
Introduction
Black silicon carbide is produced at high temperature in an electric resistance type furnace with quarts sand and petroleum coke as its main raw materials. It is used for making bonded and coated abrasive tools, grinding metal and non-metal materials of lower tensile strength, such as gray cast iron yellow bronze,aluminum, stone, leather, rubber, etc.
Chemical Compsition (%)
Grit | Sic | F.C. | Fe2O3 |
F12-F90 | ≥98.50 | <0.20 | ≤0.60 |
F100-F150 | ≥98.00 | <0.30 | ≤0.80 |
F180-F220 | ≥97.00 | <0.30 | ≤1.20 |
F230-F400 | ≥96.00 | <0.40 | ≤1.20 |
F500-F800 | ≥95.00 | <0.40 | ≤1.20 |
F1000-F1200 | ≥93.00 | <0.50 | ≤1.20 |
P12-P90 | ≥98.50 | <0.20 | ≤0.60 |
P100-P150 | ≥98.00 | <0.30 | ≤0.80 |
P180-P220 | ≥97.00 | <0.30 | ≤1.20 |
P230-P500 | ≥96.00 | <0.40 | ≤1.20 |
P600-P1500 | ≥95.00 | <0.40 | ≤1.20 |
P2000-P2500 | ≥93.00 | <0.50 | ≤1.20 |
Physical Index
Grits | Bulk Density | High Density | Grits | Bulk Density | High Density |
F16 ~ F24 | 1.42~1.50 | ≥1.50 | F100 | 1.36~1.45 | ≥1.45 |
F30 ~ F40 | 1.42~1.50 | ≥1.50 | F120 | 1.34~1.43 | ≥1.43 |
F46 ~ F54 | 1.43~1.51 | ≥1.51 | F150 | 1.32~1.41 | ≥1.41 |
F60 ~ F70 | 1.40~1.48 | ≥1.48 | F180 | 1.31~1.40 | ≥1.40 |
F80 | 1.38~1.46 | ≥1.46 | F220 | 1.31~1.40 | ≥1.40 |
F90 | 1.38~1.45 | ≥1.45 |
|
|
|
Size Available
F12-F1200,P12-P2500
0-1mm,1-3mm,6/10, 10/18, ,200mesh,325mesh
Other special spec. could be supplied as required.
Applications of black silicon carbide
Product Categories : Abrasive & Refractory > Silicon Carbide
